SE603 Separate Ultrasonic Energy Flowmeter
Clamp-on simple type ultrasonic flow meters.
Introduction
SE603 ultrasonic energy meter used widely in flow and energy
measurement is based on state-of-the-art TVT technology, which
fully meets the new standards for energy and environmental savings.
In particular, it allows accurate measurement of heat and cooling
energy in which water is the heat transfer fluid. It is
specifically adapted to the residential and industrial sectors:
low-cost housing, condominiums, buildings, individual houses,
factories, cities, neighbourhoods, etc.
The meter has remote reading functionalities in order to better
monitor energy consumption. It allows communication according to
RS485 Modbus standards.The ultrasonic technology eliminates a large
part of the pressure losses, which ensures a very wide measuring
range.
The advantage of ultrasonic measurement is that there are no moving
parts in contact with the fluid, which gives the device a long
service life.
Main Features
- No Pipe Modification Necessary,No Special Tool Needed
The difficulties commonly associated with installing a new
ultrasonic flow meter are eliminated by simple CLAMP-ON.This design
eliminates the need to cut pipe, shut down pipe running, stop
production, and reduce additional costs etc. Easy and simple
installation can be achieved by a single Phillips-head screw driver
without any special tools.
The measurement accuracy of PT1000 temperature sensor is very high,
which can reach ±0.1℃, ±0.2℃, ±0.5℃ and it can measurement energy
through the temperature differences from temperature sensors at
inlet water and outlet water.
- Hook and Snap-On Installation
The main unit(display screen) has a very special and easy
installation. Method 1, just hang it by hook hole of the top and
bottom on the wall or on the pipeline etc; Method 2, its back has
snap-on design. It can be easily installed by just clamping it on
the rail in the power distribution cabinet or somewhere that can
accommodate the buckle on its back.
Working Principle
SE603 is a separete and clamp-on ultrasonic energy meter, specially
designed for meeting the small/medium/large pipe size. It is very
easy and simple in seting-up and installation. The product
developed by adopting the ultrasonic principle of transit-time
difference method sends and receives ultrasonic signals through the
sensor. When the ultrasonic signal is transmitted and received
through the moving liquid, there will be a difference between
upstream and downstream transit-time, which can be used to
calculating flow and velocity. Samely, based on PT1000 temperature
sensor, SE603 can display energy measurement through the
temperature differences from temperature sensors at inlet water and
outlet water.
Specifications
| Performance Index |
| Flow Range | ±0.1m/s ~ ±5m/s(±0.328ft/s ~ ±16ft/s) |
| Accuracy | Valued ±2% |
| Repeatability | 0.40% |
Pipe Diameter Range(Optional) | OD9.53～OD110 |
| Measuring Medium | Regular water, sea water, cooling/hot water,alcohol... |
| Pipe Material(Optional) | PVC, stainless steel, carbon steel, copper... |
| Function Index |
| Communication Interface | RS485 communication interface, support Modbus protocol |
| Power Supply | 24V DC |
| Keyboard | 4 touch keys |
| Display | In-built Backlit OLED 128*64 dot-matrix displays |
| Temperature | Transmitter ambient temperature: 32℉~122℉(0℃~50℃) |
| Transducer measurement medium: 32℉~176℉(0℃~80℃) |
| RTD measuring: 35.6℉~221℉(2℃~105℃) |
| Humidity | RH 0~95% RH,non-condensing |
| IP | IP54 |
| Working Pressure | 1.6MPa |
| Physical Characteristics |
| Transmitter | Aluminum alloy |
| Sensor | Clamp-on |
| Cable | Standard length: 6.6ft (2m) |
Statistical table of applicable range of pipe clamp for clamp on
| DN | OD | OD Range | Inch | Flow Range |
| DN6 | OD9.53 | 9.5mm-12mm | 1/8" | 0.003 ~ 0.142 m3/h
0.047 ~ 2.374 l/min
0. 013 ~ 0.627 gal/min |
| DN8 | OD12.7 | 12mm-14mm | 1/4" | 0.011 ~ 0.570 m3/h
0.190 ~ 9.496 l/min
0. 050 ~ 2.509 gal/min |
| DN10 | OD15 | 14mm-16mm | 3/8" | 0.026 ~ 1.282 m3/h
0.427 ~ 21.366 l/min
0. 113 ~ 5.644 gal/min |
| DN15 | OD20 | 20mm-22mm | 1/2" | 0.046 ~ 2.279 m3/h
0.760 ~ 37.984 l/min
0.201 ~ 10.034 gal/min |
| DN20 | OD25 | 25mm-28mm | 3/4" | 0. 103 ~ 5. 128 m3/h
1.709 ~ 85.464 l/min
0.452 ~ 22.577 gal/min |
| DN25 | OD32 | 32mm-35mm | 1" | 0. 182 ~ 9. 116 m3/h
3.039 ~ 151.935 l/min
0.803 ~ 40. 137 gal/min |
| DN32 | OD40 | 38mm-45mm | 1- 1/4" | 0.285 ~ 14.244 m3/h
4.748 ~ 237.399 l/min
1.254 ~ 62.714 gal/min |
| DN40 | OD50 | 48mm-54mm | 1-1/2" | 0.410 ~ 20.511 m3/h
6.837 ~ 341.854 l/min
1 .806 ~ 90.309 gal/min |
| DN50 | OD63 | 58mm-64mm | 2" | 0.729 ~ 36.464 m3/h
12. 155 ~ 607.741 l/min
3.211 ~ 160549 gal/min |
| DN65 | OD75 | 72mm-78mm | 2-1/2" | 1. 140 ~ 56.976 m3/h
18.992 ~ 949.595 l/min
5.017 ~ 250.857 gal/min |
| DN80 | OD90 | 86mm-96mm | 3" | 1.641 ~ 82.045 m3/h
27.348 ~ 1367.417 l/min
7.225 ~ 361.234 gal/min |
| DN100 | OD110 | 108mm-116mm | 4" | 2.917 ~ 145.858 m3/h
48.619 ~ 2430.963 l/min
12.844 ~ 642. 194 gal/min |
